| Model |
DBE1 |
New or Used
|
NEW |
| Cost |
$255,000 + GST
|
Suitable for
|
Drymill Waste, Plywood, Particle Board, Cardboard & Paper,
Horticultural Waste Reduction & Mulching
|
Inlet Opening for Product
|
1075mm wide x 2500mm long x 1310mm deep
(product fed into machine from above)
|
| Rotor Electric Motor |
30 kW, 4 pole, 1480 rpm, 415V, 3 phase, 50 Hz |
| Rotor Vee Belt Drive |
1:1 ratio |
| Rotor Shaft Mounted Gearbox |
5:1 ratio |
| Rotor Speed |
293 rpm |
| No. of replaceable cutters |
54 (on a 2 start helix for smooth operation)
(Cutters can be rotated 3 times before replacement)
|
| Average Chip Length |
0 to 50mm (depending on screen size) |
| Hydraulic Power Unit Electric Motor |
11 kW, 4 pole, 1460 rpm, 415V, 3 phase, 50 Hz
(Hydraulic Pump Located in Tank)
|
| Hydraulically Operated Feed Table (Moving Floor) |
220mm deep x 2600mm stroke
Feed Table Controlled by Proportional Directional Valve
Hydraulically Operated Top Press Quadrant
|
| Scraper Conveyor Geared Motor |
5.5 kW, 4 pole, 415V, 3 phase, 50 Hz
30:1 ratio, 47 rpm output speed
|
| Scraper Conveyor Width |
800mm |
| Scraper Conveyor Speed |
28 mpm |
| Length of Mulcher (for transport) |
7.6m |
| Width of Mulcher (for transport) |
2.25m |
| Height of Mulcher (for transport) |
2.7m |
| Overall Length with Scraper Conveyor |
12.7m |
| Overall Width with Scraper Conveyor |
2.25m |
| Overall Height with Scraper Conveyor |
5.3m |
| Minimum Height of Inlet |
3.0m |
| Maximum Height of Collection Bin |
3.5m |
| Electrical Supply Requirement to MCC |
3 phase, 120 amp minimum
Machine is Fully Wired from MCC
|
| Machine is fitted with: |
An Overload Control Limit Switch on Rotor Gearbox
A Safety Limit Switch on Rotor Access Door
An Emergency Stop Button on both sides of machine
|
Sound level at a distance of 1m is approximately 80 dba in operation